Geophysical pre-investigation for a Stockholm tunnel project: joint inversion and interpretation of geoelectric and seismic refraction data in an urban environment
M. Ronczka, R. Wisén and T. Dahlin
Journal name: Near Surface Geophysics
Issue: Vol 16, No 3, June 2018 pp. 258 - 268
Special topic: Urban Geophysics: New Developments and Research
Info: Article, PDF ( 1.92Mb )
Price: € 30
Underground constructions for public traffic purposes are becoming increasingly important for urban areas in order to use the limited space more efficiently. Several electric resistivity tomography and seismic refraction tomography measurements were performed crossing a water passage near Stockholm during the pre-investigation phase of a tunnel building project. The objective was to determine the bedrock interface and qualitatively assess the rock quality. The scope of this study is to present a field case in an urban environment and show improvements of geophysical results due to additional model constraints by a joint inversion. Results of individual inversions show a large transition zone below the seabed from electric resistivity tomography. Some parts of the seismic refraction tomography have a low model resolution, due to gas-bearing sediments with a low velocity together with a high noise level, which leads to insufficient investigation depth that makes it difficult to determine the bedrock interface. However, the bedrock interface could be reconstructed in the resistivity model by performing a joint inversion, using the seismic velocity model to constrain the electric resistivity tomography model and vice versa. Adjacent geotechnical soundings support the joint inversion results. A vertical low resistive zone could be identified as a dominant fracture zone in the southern part of the investigated area. In general, the joint inversion approach significantly improved the electric resistivity tomography results and provided a more reliable bedrock estimation.